• Read and understand this manual before installing or operating the Altivar 61 drive. Installation, adjustment, repair and maintenance must be performed by qualified personnel. • The user is responsible for compliance with all international and national electrical standards in force concerning protective grounding of all equipment. Physical interface 2-wire RS 485 for Modbus Transmission frame RTU for Modbus Transmission rate 9600 bps, 19200 bps for Modbus on front face 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen Data format 8 bits, odd even or no configurable parity for Modbus on terminal 30072-451-60C Altivar® 61 Variable Speed Drives Simplified Manual 09/2008 Setting Up the Drive 11 Setting Up the Drive b 1 Take delivery of the drive • Ensure that the catalog number printed on the label is the same as that on the purchase order. • Remove the drive from its packaging and ensure that it has not been damaged in transit Altivar 61 UL Type 1/IP 20 drives can also be used in conjunction with motors rated between 0.37 kW and 5.5 kW on a single phase 200…240 V supply (derating is required). The Altivar 61 drive integrates the Modbus and CANopen protocols as standard as well as numerous functions. These functions can be extended using communication, HMI - Monitoring Mode Confidential Property of Schneider Electric | Page 25 Submenus Return • Submenus : • 901 [STATE OF LOGIC INPUTS LI1 TO LI4] • 902 [STATE OF THE LOGIC OUTPUT LO1 AND RELAY R1] • 903 [DISPLAY OF HIGH SPEED VALUE] • 904 [DRIVE POWER RATING] •905 [DRIVE VOLTAGE RATING] • 906 [SPECIFIC PRODUCT NUMBER] • 907 [CARD 1 SOFTWARE VERSION] • 908 [CARD 2 SOFTWARE ATV71 Integrated Modbus manual 1755863 ATV71 Modbus Plus manual 1755869 ATV71 Uni-Telway manual 1755867 ATV71 Modbus with Uni-Telway manual 1755875 The following Altivar 61/71 technical documents are available on the Web site schneider-electric.com. b ,QVWDOODWLRQ 0DQXDO This manual describes: Altivar 61's Power Removal function. This function requires the use of connection diagrams conforming to category 3 of standard EN 954-1, ISO 13849-1 and safety integrity level 2 according to IEC/EN 61508. The Power Removal function takes priority over any run command. Read and observe the instructions in the Programming Manual. CAUTION Tutorial for changing terminal type control between sink and source modes on the Altivar ATV61 & ATV71 Variable Frequency Drives (VFD).To learn more, please More than 150 functions available. Motor and drive thermal protection. Overload: 110% … 120% - 60 seconds. Integrated PID regulator, with preset PID references and automatic/manual mode. MRO Drives has all Altivar 61 VFD series drives available. For more information or to request a quote, please call 800-691-8511 or email sales@mrodrives.com. Altivar 610 EAV64387 07/2014 Programming Manual 07/2014. 2 EAV64387 07/2014 The information provided in this documentation contains general descriptions and/or technical character-istics of the performance of the products contained herein. This documentation is not intended as a 61 [Modbus network diag] This manual describes how to set up the Altivar 71 drive on Modbus and also describes the Modbus services that are available on this drive. Notation Drive terminal displays The graphic display terminal menus are shown in square brackets. Example: [1.9 COMMUNICATION]. The integr